i ntegrated c ircuits d ivision www.ixysic.com ds-lca715-r06 1 lca715 single-pole, normally open 6-pin optomos ? relay e 3 pb part # description lca715 6 pin dip (50/tube) lca715s 6 pin surface mount (50/tube) LCA715STR 6 pin surface mount (1000/reel) parameter ratings units blocking voltage 60 v p load current 2.2 a rms / a dc on-resistance (max) 0.15 ? applications features description ordering information pin configuration ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment?patient/equipment isolation ? security ? aerospace ? industrial controls ? 3750v rms input/output isolation ? low drive power requirements (ttl/cmos compatible) ? no moving parts ? high reliability ? arc-free with no snubbing circuits ? no emi/rfi generation ? small 6-pin package ? machine insertable, wave solderable ? surface mount and tape & reel versions available switching characteristics of normally open devices approvals ? ul recognized component: file e76270 ? csa certified component: certificate 1172007 ? en/iec 60950: tuv certificate b 09 07 49410 004 1 3 2 4 5 6 + control - control do not use load do not use load ac/dc configuration 1 3 2 4 5 6 + control - control do not use + load - load dc only configuration form-a i f i load 10% 90% t on t off the lca715 is a 60v single-pole, normally open (1-form-a) solid state relay. it uses optically coupled mosfet technology to provide 3750v rms of input to output isolation, and features an ultra-low on-resistance for high-current operation. its optically coupled outputs, which use the patented optomos architecture, are controlled by a highly efficient gaaias infrared led. offering the superior reliability associated with semiconductor devices, the lca715 can be used to replace mechanical relays. because it has no moving parts, it can offer faster, bounce-free switching in a more compact surface mount or thru-hole package.
i ntegrated c ircuits d ivision www.ixysic.com 2 r06 lca715 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings @ 25oc electrical characteristcs @ 25oc parameter ratings units blocking voltage 60 v p reverse input voltage 5 v input control current peak (10ms) 50 ma 1a input power dissipation 70 mw total power dissipation 1 800 mw esd, human body model 8 kv isolation voltage, input to output 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 6.67 mw / oc parameter conditions symbol min typ max units output characteristics load current continuous, ac/dc con? guration continuous, free air i l - - 2.2 a rms / a dc continuous, dc con? guration - - 4 a dc peak t<10ms i lpk - - 10 a p on-resistance 1 ac/dc con? guration i f =5ma, i l =1a r on - 0.12 0.15 ? dc con? guration - 0.038 0.05 off-state leakage current i f =0ma, v l =60v p i leak --1 ? a switching speeds turn-on i f =5ma, v l =10v t on - 0.7 2.5 ms turn-off t off - 0.115 0.25 ms output capacitance i f =0ma, f=1mhz v l =10v c out - 110 200 pf v l =50v - 60 - input characteristics input control current to activate i l =1a i f - 0.9 5 ma input control current to deactivate - i f 0.4 - - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input current v r =5v i r --10 ? a common characteristics input to output capacitance - c i/o -3- pf 1 measurement taken within 1 second of on-time.
i ntegrated c ircuits d ivision lca715 www.ixysic.com 3 r06 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. led forward voltage (v) 1.235 1.240 1.245 1.250 1.255 1.260 1.265 device count (n) 0 5 10 15 20 25 30 typical led forward voltage drop (n=50, i f =5ma) turn-on time (ms) 0.55 0.60 0.65 0.70 0.75 0.80 0.85 device count (n) 0 5 10 15 20 typical turn-on time distribution (n=50, i f =5ma, i l =100ma) turn-off time (ms) 0.109 0.111 0.113 0.115 0.117 0.119 0.121 device count (n) 0 5 10 15 20 25 typical turn-off time distribution (n=50, i f =5ma, i l =100ma) led current (ma) 0.7 0.8 0.9 1.0 1.1 device count (n) 0 5 10 15 20 25 30 typical i f for switch operation (n=50, i l =100ma) on-resistance ( : ) 0.110 0.111 0.112 0.113 0.114 0.115 device count (n) 0 5 10 15 20 25 30 typical on-resistance distribution (n=50, i f =5ma, i l =1a) blocking voltage (v p ) 81 82 83 84 85 86 87 device count (n) 0 5 10 15 20 25 typical blocking voltage distribution (n=50) temperature (oc) -40 -20 0 20 40 60 80 100 led forward voltage (v) 1.1 1.2 1.3 1.4 1.5 1.6 typical led forward voltage vs. temperature i f =50ma i f =20ma i f =10ma i f =5ma led forward current (ma) 0 1020304050 turn-on time (ms) 0.0 0.4 0.8 1.2 1.6 2.0 typical turn-on time vs. led forward current (i l =100ma) led forward current (ma) 0 1020304050 turn-off time (ms) 0.095 0.100 0.105 0.110 0.115 0.120 typical turn-off time vs. led forward current (i l =100ma) temperature (oc) -40 -20 0 20 40 60 80 100 led current (ma) 0.7 0.8 0.9 1.0 1.1 1.2 1.3 led current to operate vs. temperature (i l =1a) temperature (oc) -40 -20 0 20 40 60 80 100 turn-on time (ms) 0.2 0.3 0.4 0.5 0.6 0.7 0.8 turn-on time vs. temperature (i l =100ma) i f =5ma i f =10ma temperature (oc) -40 -20 0 20 40 60 80 100 turn-off time (ms) 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 turn-off time vs. temperature (i l =100ma) i f =10ma i f =5ma performance data @25oc (unless otherwise noted)*
i ntegrated c ircuits d ivision www.ixysic.com 4 r06 lca715 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. temperature (oc) -40 -20 0 20 40 60 80 100 on-resistance ( : ) 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 on-resistance vs. temperature (i f =5ma, i l =1a) load voltage (v) 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 load current (a) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 typical load current vs. load voltage dc-only configuration (i f =5ma) load voltage (v) -0.3 -0.2 -0.1 0.0 0.1 0.2 0.3 load current (a) -3 -2 -1 0 1 2 3 typical load current vs. load voltage ac/dc configuration (i f =5ma) temperature (oc) -40 -20 0 20 40 60 80 100 load current (a) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 maximum load current vs. temperature (i f =5ma) dc-only configuration ac/dc configuration temperature (oc) -40 -20 0 20 40 60 80 100 blocking voltage (v p ) 78 80 82 84 86 88 blocking voltage vs. temperature temperature (oc) -40 -20 0 20 40 60 80 100 leakag current ( p a) 0.000 0.005 0.010 0.015 0.020 typical leakage vs. temperature (v l =60v) load voltage (v) 0 102030405060 output capacitance (pf) 40 80 120 160 200 240 output capacitance vs. load voltage ( i f =0ma, f=1mhz) time 10 p s 100 p s 1ms 10ms 100ms 1s 10s 100s load current (a) 2 3 4 5 6 7 8 9 10 11 energy rating curve performance data @25oc (unless otherwise noted)*
i ntegrated c ircuits d ivision lca715 www.ixysic.com 5 r06 manufacturing information moisture sensitivity all plastic encapsulated semiconductor packages are susceptible to moisture ingression. ixys integrated circuits division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, ipc/jedec j-std-020 , in force at the time of product evaluation. we test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. this product carries a moisture sensitivity level (msl) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard ipc/jedec j-std-033 . device moisture sensitivity level (msl) rating lca715 / lca715s msl 1 esd sensitivity this product is esd sensitive , and should be handled according to the industry standard jesd-625 . reflow profile this product has a maximum body temperature and time rating as shown below. all other guidelines of j-std-020 must be observed. device maximum temperature x time lca715 / lca715s 250oc for 30 seconds board wash ixys integrated circuits division recommends the use of no-clean flux formulations. however, board washing to remove flux residue is acceptable. since ixys integrated circuits division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. chlorine- or fluorine-based solvents or fluxes should not be used. cleaning methods that employ ultrasonic energy should not be used. e 3 pb
i ntegrated c ircuits d ivision www.ixysic.com 6 r06 lca715 dimensions mm (inches) pcb hole pattern 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 5.080 0.127 (0.200 0.005) 6 - 0.800 dia. (6 - 0.031 dia.) 0.254 0.0127 (0.010 0.0005) 9.144 0.508 (0.360 0.020) 7.239 typ (0.285 typ) 7.620 0.254 (0.300 0.010) 3.302 0.051 (0.130 0.002) 4.064 typ (0.160 typ) 0.457 0.076 (0.018 0.003) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 1.651 0.254 (0.065 0.010) pin 1 dimensions mm (inches) pcb land pattern 0.254 0.0127 (0.010 0.0005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 8.382 0.381 (0.330 0.015) 2.54 0.127 (0.100 0.005) 9.524 0.508 (0.375 0.020) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 1.651 0.254 (0.065 0.010) pin 1 mechanical dimensions lca715 lca715s
i ntegrated c ircuits d ivision specification: ds-lca715-r06 ?copyright 2012, ixys integrated circuits division all rights reserved. printed in usa. 12/22/2012 for additional information please visit our website at: www.ixysic.com 7 lca715 ixys integrated circuits division makes no representations or warranties with respect to the accuracy or completeness of the co ntents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity a re expressed or implied. except as set forth in ixys integrated circuits division?s standard terms and conditions of sale, ixys integrated circuits division assumes no liability whatsoever, a nd disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infri ngement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of ixys integrated circuits division?s product may resul t in direct physical harm, injury, or death to a person or severe property or environmental damage. ixys integrated circuits division reserves the right to discontinue or make changes to its p roducts at any time without notice. notes: 1. all dimensions carry tolerances of eia standard 481-2 2. the tape complies with all notes for constant dimensions listed on page 5 of eia-481-2 dimensions mm (inches) embossment embossed carrier 330.2 dia (13.00 dia) top cover tape thickness 0.102 max (0.004 max) w=16.00 (0.63) b 0 = 10.10 (0.398) a 0 = 10.10 (0.398) p = 12.00 (0.472) k 1 = 3.80 (0.15) k 0 = 4.90 (0.19) user direction of feed LCA715STR tape & reel
|
